AiM Solo 2 DL CAN/RS232 Wiring Harness ( Solo 2 DL)

Moving your Solo2 DL from one car to another and need another harness for only power or both power and data input, this is your cable. If you are putting a Solo DL into an older vehicle and need a power supply cable, use this and use only the + and - wires and fold back the can inputs. 

The AiM V02569050 harness connects your Solo 2 DL to your ECU via CAN or RS232 wiring. One end has a 7-pin 712 (screw-in) connector to fit the Solo 2 DL, and the other has 6 non-terminated wires (CAN+, CAN-, RS232RX, RS232TX, Power, and Ground).

Does not fit original AiM Solo DL.

• Manufacturer: AiM
• Manufacturer part number: V02589050
• Fits Solo DL: No
• Fits Solo 2 DL: Yes
• Fits Solo Base Model: No
• Fits Solo 2 Base Model: No
• Pins on AiM Solo DL Side: 7 Pin Thread on connector
• Vehicle Chassis Ends: 6 Non terminated wires
• Vehicle Chassis Ends Break Out: Red=12VDC, Black=Ground, Blue=ECU RS232TX, Blue=ECU RS232 CAN-, Gray ECU RS232 RX, Gray CAN+

AiM Solo 2 DL CAN/RS232 Wiring Harness ( Solo 2 DL) Wiring Codes:

• Red: 9-15VDC
• Black: Ground
• Grey: CAN+
• Blue: CAN-
• Black: ECU RS232 RX
• Blue: ECU RS232TX

Both blue wires are the same color, but each wire has an identifier tag stating the connection type

Vehicle Applications:

• 1990-2005 Mazda Miata 1.6L NA6 & 1.8L NA8, NB1, & NB2